- Postcode districts
- TS16, TS17, TS18
- Nearby
- Stockton-on-Tees, Yarm and Billingham
- Guide price
- £1,350–£5,400
- Typical time on site
- 1–3 working days
- Water
- Moderately hard across most of County Durham
- Survey
- Free, at your home
What does fitted bathroom furniture cost in Thornaby-on-Tees?
As a guide, budget £1,350 to £5,400 including VAT for fitted bathroom furniture in Thornaby-on-Tees; your written quote will pin it down. Labour costs in North East England put local prices at about 10% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Compact run
- Soft-close doors
Full fitted run
- Vanity, WC unit and tall storage
Wall-to-wall
- Mirror cabinets and lighting
Guide prices for Thornaby-on-Tees including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Thornaby-on-Tees
As well as Thornaby-on-Tees itself (TS16, TS17 and TS18), we survey in Stockton-on-Tees, Yarm and Billingham.
Thornaby-on-Tees gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Thornaby-on-Tees home has uneven walls, fillers and end panels are scribed to them on site rather than left with gaps. We measure Thornaby-on-Tees bathrooms wall by wall before ordering, so the run is made for your room.
Supplies across most of County Durham are moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply of carcasses, doors, plinths, fillers and end panels in your chosen finish
- A worktop cut to length, with basin and tap cut-outs and sealed edges
- A concealed cistern or cistern frame, with an isolation valve you can reach through the flush plate or a panel
- Tall units fixed to the wall, doors adjusted and soft-close hinges set
Decisions to make first
Unit depth
Slimline units are shallower and suit narrow rooms; standard-depth units hold more and give a wider worktop over the cistern.
Cistern type
A back-to-wall pan can use a cistern that sits inside the WC unit, which is simple to service. A wall-hung WC needs a load-bearing frame built in behind the run.
Rules that apply in England
In England, wiring a lit mirror or plinth lights means altering a circuit in a room with a bath or shower, which is notifiable under Part P. The Water Supply (Water Fittings) Regulations 1999 cover the new WC and basin taps.
