What does fitted bathroom furniture cost in Cumbria?
Our guide range in Cumbria is £1,400–£5,600 including VAT. Prices in Cumbria run at about 6% below the UK guide, based on North West England labour rates.
Compact run
- Laminate worktop
Full fitted run
- Fillers scribed to the walls
Wall-to-wall
- Floor-to-ceiling storage
Guide prices for Cumbria including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Cumbria?
Supplies across most of Cumbria are soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier. For Carlisle homeowners keeping their existing tiles, a furniture run can often go in over one to three days.
What the job includes
- A worktop cut to length, with basin and tap cut-outs and sealed edges
- Removal of the old basin, WC or cabinets, with redundant supplies capped
- Tall units fixed to the wall, doors adjusted and soft-close hinges set
- Measuring every wall for length, height and how far it is out of square
- Fillers and end panels scribed to the walls, and the worktop sealed with silicone
- Basin, tap and waste connected, and the WC pan fixed and joined to the soil pipe
Decisions to make first
Lighting in the run
Plinth lights and an illuminated mirror cabinet must be planned at first fix, because the cables run inside the furniture and need RCD protection.
Tall storage
A tall unit at the end of the run takes towels and cleaning products off the floor. Check it clears the door, window and towel rail.
Cistern type
A back-to-wall pan can use a cistern that sits inside the WC unit, which is simple to service. A wall-hung WC needs a load-bearing frame built in behind the run.
Unit depth
Slimline units are shallower and suit narrow rooms; standard-depth units hold more and give a wider worktop over the cistern.
Rules that apply in England
Fitted furniture itself is not controlled by building regulations, but what goes into it is. A new WC must meet the water fittings rules, with a maximum 6-litre flush and backflow protection. Illuminated mirrors, cabinet lights and shaver points must suit the bathroom zones under BS 7671, on circuits with 30 mA RCD protection, and apart from shaver supply units, sockets must be at least 3 m from the edge of zone 1.
In England, wiring a lit mirror or plinth lights means altering a circuit in a room with a bath or shower, which is notifiable under Part P. The Water Supply (Water Fittings) Regulations 1999 cover the new WC and basin taps.