What does fitted bathroom furniture cost in Dyfed?
Our guide range in Dyfed is £1,400–£5,600 including VAT. Prices in Dyfed run at about 7% below the UK guide, based on Wales labour rates.
Compact run
- Vanity and WC unit with concealed cistern
Full fitted run
- Quartz-effect or solid-surface top
Wall-to-wall
- Made to suit awkward spaces
Guide prices for Dyfed including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Dyfed?
Most of Dyfed is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier. We measure Llanelli bathrooms wall by wall before ordering, so the run is made for your room.
What the job includes
- Tall units fixed to the wall, doors adjusted and soft-close hinges set
- Basin, tap and waste connected, and the WC pan fixed and joined to the soil pipe
- Measuring every wall for length, height and how far it is out of square
- Fillers and end panels scribed to the walls, and the worktop sealed with silicone
- A worktop cut to length, with basin and tap cut-outs and sealed edges
- A concealed cistern or cistern frame, with an isolation valve you can reach through the flush plate or a panel
Decisions to make first
Carcass board
Moisture-resistant board with sealed edges is the minimum. Some ranges use a PVC-based or similar carcass that copes better with splashes and leaks.
Tall storage
A tall unit at the end of the run takes towels and cleaning products off the floor. Check it clears the door, window and towel rail.
Cistern type
A back-to-wall pan can use a cistern that sits inside the WC unit, which is simple to service. A wall-hung WC needs a load-bearing frame built in behind the run.
Unit depth
Slimline units are shallower and suit narrow rooms; standard-depth units hold more and give a wider worktop over the cistern.
Rules that apply in Wales
Fitted furniture itself is not controlled by building regulations, but what goes into it is. A new WC must meet the water fittings rules, with a maximum 6-litre flush and backflow protection. Illuminated mirrors, cabinet lights and shaver points must suit the bathroom zones under BS 7671, on circuits with 30 mA RCD protection, and apart from shaver supply units, sockets must be at least 3 m from the edge of zone 1.
Wales has its own Part P with a wider list of notifiable work, so lit furniture should be connected by a registered electrician who notifies it. The water fittings rules are the same as in England.