What does fitted bathroom furniture cost in Perth and Kinross?
Our guide range in Perth and Kinross is £1,450–£5,800 including VAT. Prices in Perth and Kinross run at about 4% below the UK guide, based on Scotland labour rates.
Compact run
- Vanity and WC unit with concealed cistern
Full fitted run
- Quartz-effect or solid-surface top
Wall-to-wall
- Made to suit awkward spaces
Guide prices for Perth & Kinross including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Perth and Kinross?
Water across much of Perth and Kinross is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Perth bathroom has pipes running along the walls, a fitted run can box them in neatly while adding storage.
What the job includes
- A worktop cut to length, with basin and tap cut-outs and sealed edges
- Fillers and end panels scribed to the walls, and the worktop sealed with silicone
- Removal of the old basin, WC or cabinets, with redundant supplies capped
- Tall units fixed to the wall, doors adjusted and soft-close hinges set
- Basin, tap and waste connected, and the WC pan fixed and joined to the soil pipe
- Supply of carcasses, doors, plinths, fillers and end panels in your chosen finish
Decisions to make first
Door style
Slab doors are the easiest to wipe down. Shaker doors look traditional but have grooves that collect dust. Handleless push-to-open doors suit a plain, modern room.
Lighting in the run
Plinth lights and an illuminated mirror cabinet must be planned at first fix, because the cables run inside the furniture and need RCD protection.
Tall storage
A tall unit at the end of the run takes towels and cleaning products off the floor. Check it clears the door, window and towel rail.
Cistern type
A back-to-wall pan can use a cistern that sits inside the WC unit, which is simple to service. A wall-hung WC needs a load-bearing frame built in behind the run.
Rules that apply in Scotland
Fitted furniture itself is not controlled by building regulations, but what goes into it is. A new WC must meet the water fittings rules, with a maximum 6-litre flush and backflow protection. Illuminated mirrors, cabinet lights and shaver points must suit the bathroom zones under BS 7671, on circuits with 30 mA RCD protection, and apart from shaver supply units, sockets must be at least 3 m from the edge of zone 1.
In Scotland, fitting furniture in an existing bathroom does not need a building warrant. New WCs and taps must meet the Scottish Water Byelaws 2014, and any wiring for lit units is tested and certified to BS 7671.