Fitted bathroom furniture in West Sussex

What does fitted bathroom furniture cost in West Sussex?

Our guide range in West Sussex is £1,700–£6,700 including VAT. Prices in West Sussex run at about 12% above the UK guide, based on South East England labour rates.

Guide prices for West Sussex including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in West Sussex?

• Crawley
• Worthing
• Bognor Regis
• Littlehampton
• Horsham
• Haywards Heath
• Chichester
• Burgess Hill
• East Grinstead
• Shoreham-by-Sea
• Emsworth
• Lancing

Supplies across most of West Sussex are hard. Taps, plug wastes and toilet pans scale up quickly, so chrome copes better than matt black, and a removable aerator is worth having. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Crawley bathroom has pipes running along the walls, a fitted run can box them in neatly while adding storage.

What the job includes

• Tall units fixed to the wall, doors adjusted and soft-close hinges set
• Measuring every wall for length, height and how far it is out of square
• A worktop cut to length, with basin and tap cut-outs and sealed edges
• Removal of the old basin, WC or cabinets, with redundant supplies capped
• Basin, tap and waste connected, and the WC pan fixed and joined to the soil pipe
• Fillers and end panels scribed to the walls, and the worktop sealed with silicone

Decisions to make first

Tall storage

A tall unit at the end of the run takes towels and cleaning products off the floor. Check it clears the door, window and towel rail.

Unit depth

Slimline units are shallower and suit narrow rooms; standard-depth units hold more and give a wider worktop over the cistern.

Cistern type

A back-to-wall pan can use a cistern that sits inside the WC unit, which is simple to service. A wall-hung WC needs a load-bearing frame built in behind the run.

Lighting in the run

Plinth lights and an illuminated mirror cabinet must be planned at first fix, because the cables run inside the furniture and need RCD protection.

Rules that apply in England

Fitted furniture itself is not controlled by building regulations, but what goes into it is. A new WC must meet the water fittings rules, with a maximum 6-litre flush and backflow protection. Illuminated mirrors, cabinet lights and shaver points must suit the bathroom zones under BS 7671, on circuits with 30 mA RCD protection, and apart from shaver supply units, sockets must be at least 3 m from the edge of zone 1.

In England, wiring a lit mirror or plinth lights means altering a circuit in a room with a bath or shower, which is notifiable under Part P. The Water Supply (Water Fittings) Regulations 1999 cover the new WC and basin taps.