What does a loft bathroom cost in Buckinghamshire?
Our guide range in Buckinghamshire is £7,300–£14,500 including VAT. Prices in Buckinghamshire run at about 12% above the UK guide, based on South East England labour rates.
Refit
- Shower, basin and WC replaced
Signature
- Pump or macerator where needed
New loft bathroom
- Formed in an existing loft room
Guide prices for Buckinghamshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Buckinghamshire?
- Milton Keynes
- High Wycombe
- Aylesbury
- Bletchley
- Amersham
- Chesham
- Gerrards Cross
- Chalfont St Peter
- Marlow
- Amersham on the Hill
- Newport Pagnell
Water across much of Buckinghamshire is hard. If your supply in Milton Keynes is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. We plan loft bathrooms in Milton Keynes around the roof line, so the shower sits where you can stand and the eaves become storage.
What the job includes
- A shower pump on a gravity system, an electric shower, or advice on moving to mains pressure, depending on your system
- Electrics by a qualified electrician, tested and certified, then tiling, testing and handover
- Fitted furniture made to the eaves, so the low space behind the slope becomes storage
- A survey of the headroom across the room, with the usable height marked at each fitting position
- A check of your hot-water system and of the pressure and flow you actually get at loft level
- An extractor fan ducted through the roof or a gable wall, with the duct insulated through cold spaces
Decisions to make first
Where the shower goes
Under the ridge or in a dormer, where the full height is. A walk-in shower with a single panel is usually easier to fit to a roof line than a framed enclosure.
Bath or no bath
A bath under the slope makes good use of low space, but the floor has to carry it when it is full of water and someone is in it.
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Eaves storage
Low cupboards built into the slope behind the WC or basin take clutter out of the room and hide the pipework.
Rules that apply in England
A bathroom inside an existing loft room does not usually need planning permission, but forming one is normally building-regulations work because of the new drainage, extract ventilation and electrics. A macerator or pumped WC is acceptable only where the home also has a WC on gravity drainage. Under the water fittings rules, a shower pump must never be connected directly to the mains supply.
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.