- Postcode districts
- ME2
- Nearby
- Rochester, Chatham and Gillingham
- Guide price
- £7,300–£14,500
- Typical time on site
- 6–12 working days
- Water
- Very hard across most of Kent
- Survey
- Free, at your home
What does a loft bathroom cost in Strood?
As a guide, budget £7,300 to £14,500 including VAT for a loft bathroom in Strood; your written quote will pin it down. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Signature
- Pump or macerator where needed
New loft bathroom
- Formed in an existing loft room
Guide prices for Strood including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Strood
As well as Strood itself (ME2), we survey in Rochester, Chatham and Gillingham.
Homes in and around Strood vary, so we look at the floor, the walls and the water system before we price anything. If your Strood loft conversion has a bedroom but no bathroom, the survey starts with where the soil stack runs and how much headroom you have. If your Strood home has a gravity-drained WC on another floor, a macerator in the loft may open up more layout options.
Water across much of Kent is very hard. If your supply in Strood is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system and of the pressure and flow you actually get at loft level
- Electrics by a qualified electrician, tested and certified, then tiling, testing and handover
- An extractor fan ducted through the roof or a gable wall, with the duct insulated through cold spaces
- A survey of the headroom across the room, with the usable height marked at each fitting position
Decisions to make first
Where the shower goes
Under the ridge or in a dormer, where the full height is. A walk-in shower with a single panel is usually easier to fit to a roof line than a framed enclosure.
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Rules that apply in England
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.

