- Postcode districts
- KT17, SM2, SM7
- Nearby
- Sutton, Ewell and Epsom
- Guide price
- £7,300–£14,500
- Typical time on site
- 6–12 working days
- Water
- Hard across most of Surrey
- Survey
- Free, at your home
What does a loft bathroom cost in Banstead?
As a guide, budget £7,300 to £14,500 including VAT for a loft bathroom in Banstead; your written quote will pin it down. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Tiling, lighting, extractor fan
Signature
- Walk-in shower under the ridge
New loft bathroom
- New drainage route and water supply
Guide prices for Banstead including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Banstead
We cover every part of Banstead, including KT17, SM2 and SM7, and nearby Sutton (1.9 miles) and Ewell (2.6 miles).
Homes in and around Banstead vary, so we look at the floor, the walls and the water system before we price anything. We plan loft bathrooms in Banstead around the roof line, so the shower sits where you can stand and the eaves become storage. If your Banstead loft shower is weak or the waste drains slowly, the fix is often in the pump or the pipe fall rather than the shower itself.
Supplies across most of Surrey are hard. If your supply in Banstead is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of the floor joists where a bath or large shower tray will sit
- An extractor fan ducted through the roof or a gable wall, with the duct insulated through cold spaces
- A shower pump on a gravity system, an electric shower, or advice on moving to mains pressure, depending on your system
- A survey of the headroom across the room, with the usable height marked at each fitting position
Decisions to make first
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Bath or no bath
A bath under the slope makes good use of low space, but the floor has to carry it when it is full of water and someone is in it.
Rules that apply in England
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.

