- Postcode districts
- WF13, WF15, WF16
- Nearby
- Liversedge, Batley and Cleckheaton
- Guide price
- £6,000–£12,000
- Typical time on site
- 6–12 working days
- Water
- Soft across most of West Yorkshire
- Survey
- Free, at your home
What does a loft bathroom cost in Heckmondwike?
Guide price in Heckmondwike: £6,000–£12,000 including VAT, depending on the room and what you choose. Prices in Yorkshire and the Humber run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Signature
- Pump or macerator where needed
New loft bathroom
- Formed in an existing loft room
Guide prices for Heckmondwike including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Heckmondwike
We work right across Heckmondwike — WF13, WF15 and WF16 — and in neighbouring Liversedge and Batley.
Being a smaller town does not change how we work in Heckmondwike: free survey, written quote, one team. If your Heckmondwike loft conversion has a bedroom but no bathroom, the survey starts with where the soil stack runs and how much headroom you have. For a loft bathroom in a tank-fed Heckmondwike home, we work out how the shower will get its pressure before choosing a single fitting.
Most of West Yorkshire is supplied with soft water. If that holds for your street in Heckmondwike, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A survey of the headroom across the room, with the usable height marked at each fitting position
- Fitted furniture made to the eaves, so the low space behind the slope becomes storage
- A check of the floor joists where a bath or large shower tray will sit
- An extractor fan ducted through the roof or a gable wall, with the duct insulated through cold spaces
Decisions to make first
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Eaves storage
Low cupboards built into the slope behind the WC or basin take clutter out of the room and hide the pipework.
Rules that apply in England
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.

