What does a luxury bathroom cost in Dundee and Angus?
Our guide range in Dundee and Angus is £11,500–£24,000 including VAT. Prices in Dundee and Angus run at about 4% below the UK guide, based on Scotland labour rates.
Premium
- Designer brassware and wall-hung pieces
Signature
- Underfloor heating, layered lighting
Statement
- Natural stone or microcement
Guide prices for Dundee & Angus including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Dundee and Angus?
Water across much of Dundee and Angus is soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Dundee home has a larger main bathroom, a freestanding bath with a separate walk-in shower is usually where the design starts.
What the job includes
- A detailed survey of the floor structure, hot-water capacity, water pressure and flow
- Concealed thermostatic or digital shower valves, set into the wall to the depth the manufacturer specifies
- Underfloor heating, layered lighting and any steam unit wired by a qualified electrician, tested and certified
- Large-format porcelain, natural stone or microcement over full tanking
- Layout drawings, wall elevations and a tile setting-out plan
- A full snag check, sealing of stone where needed, and a handover of manuals and isolation points
Decisions to make first
Lighting
Layer it: IP-rated ceiling lights for general use, a lit mirror at the basin and low-level LED in niches or plinths for night, each on its own switch or dimmer.
Wall and floor finish
Large-format porcelain gives a stone look with little upkeep. Natural stone and microcement are beautiful but need sealing and care, especially in hard-water areas.
Freestanding bath material
Acrylic is light and warm to the touch. Stone resin holds heat and feels solid but is much heavier. Cast iron is the heaviest of all and nearly always needs a structural check.
Brassware finish
Chrome is the easiest to keep clean. Brushed brass, nickel and matt black look striking but show limescale marks unless they are wiped down.
Rules that apply in Scotland
Internal bathroom work does not need planning permission, but a listed building needs listed building consent for alterations affecting its character, including new soil or vent pipes through walls. Heavy baths and stone floors add load to the floor structure, which should be checked first. Electrics must meet BS 7671, including the IP ratings in each zone and 30 mA RCD protection on every circuit.
In Scotland, structural work such as strengthening a floor, or altering the drainage, may need a building warrant. An unvented cylinder should be fitted by an installer qualified for unvented systems, and the electrics tested and certified to BS 7671.