- Postcode districts
- SL9
- Nearby
- Gerrards Cross, Rickmansworth and Amersham
- Guide price
- £500–£3,900
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Buckinghamshire
- Survey
- Free, at your home
What does a new shower cost in Chalfont St Peter?
Guide price in Chalfont St Peter: £500–£3,900 including VAT, depending on the room and what you choose. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Chalfont St Peter including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Chalfont St Peter
As well as Chalfont St Peter itself (SL9), we survey in Gerrards Cross, Rickmansworth and Amersham.
Chalfont St Peter gets the same process as anywhere else: a free survey at your home and a written, itemised quote. For Chalfont St Peter homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If you are replacing a failed electric shower in Chalfont St Peter, we check whether the existing cable and circuit suit the new unit.
Water across much of Buckinghamshire is hard. If your supply in Chalfont St Peter is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A bath screen, tray or enclosure where the shower is new
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Decisions to make first
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
