- Postcode districts
- TR1
- Nearby
- Falmouth, Redruth and Newquay
- Guide price
- £450–£3,600
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Cornwall
- Survey
- Free, at your home
What does a new shower cost in Truro?
In Truro, a new shower typically costs £450–£3,600 including VAT, based on South West England prices. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Truro including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Truro
We cover every part of Truro, including TR1, and nearby Falmouth (7.7 miles) and Redruth (7.8 miles).
Truro gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Truro bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. For Truro homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.
Most of Cornwall is supplied with soft water. If that holds for your street in Truro, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system, water pressure and flow rate
- Electrical connection by a qualified electrician, tested and certified
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

