- Postcode districts
- BT23
- Nearby
- Bangor, Castlereagh and Belfast
- Guide price
- £400–£3,100
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of County Down
- Survey
- Free, at your home
What does a new shower cost in Newtownards?
As a guide, budget £400 to £3,100 including VAT for a new shower in Newtownards; your written quote will pin it down. Prices in Northern Ireland run at about 12% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Newtownards including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Newtownards
As well as Newtownards itself (BT23), we survey in Bangor, Castlereagh and Belfast.
In Newtownards, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. For Newtownards homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If you want a shower in your Newtownards home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.
Water across much of County Down is soft. If that holds for your street in Newtownards, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Electrical connection by a qualified electrician, tested and certified
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Rules that apply in Northern Ireland
In Northern Ireland there is no Part P; electric shower circuits should be installed and certified to BS 7671. The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 cover pumps and backflow protection.

