- Postcode districts
- BT81, BT82
- Nearby
- Omagh, Cookstown and Dungannon
- Guide price
- £400–£3,100
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of County Tyrone
- Survey
- Free, at your home
What does a new shower cost in Strabane?
Our guide price for a new shower in Strabane is £400–£3,100 including VAT. Labour costs in Northern Ireland put local prices at about 12% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Strabane including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Strabane
We work right across Strabane — BT81 and BT82 — and in neighbouring Omagh and Cookstown.
Being a smaller town does not change how we work in Strabane: free survey, written quote, one team. If you are replacing a failed electric shower in Strabane, we check whether the existing cable and circuit suit the new unit. For Strabane homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.
Water across much of County Tyrone is soft. If that holds for your street in Strabane, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A bath screen, tray or enclosure where the shower is new
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Decisions to make first
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in Northern Ireland
In Northern Ireland there is no Part P; electric shower circuits should be installed and certified to BS 7671. The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 cover pumps and backflow protection.

