Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Dumfries & Galloway · DG12

Shower installation in Annan

Thinking about a new shower in Annan? Here is what it usually costs locally, what the work involves and how we go about it.

£450–£3,400 inc VAThalf a day to 3 daysFree home survey
Thermostatic shower valve and rainfall head being installed, example for Annan
Postcode districts
DG12
Nearby
Dumfries, Locharbriggs and Stranraer
Guide price
£450–£3,400
Typical time on site
half a day to 3 days
Water
Soft across most of Dumfries and Galloway
Survey
Free, at your home

What does a new shower cost in Annan?

For Annan, our guide range for a new shower is £450 to £3,400 including VAT. Prices in Scotland run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£450–£950
  • Existing supply and position

New shower with enclosure

£1,450–£3,400
  • Tray, enclosure and valve

Guide prices for Annan including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Annan

We work right across Annan — DG12 — and in neighbouring Dumfries and Locharbriggs.

Being a smaller town does not change how we work in Annan: free survey, written quote, one team. If the shower in your Annan home swings between hot and cold, a thermostatic valve is usually the fix. If you are replacing a failed electric shower in Annan, we check whether the existing cable and circuit suit the new unit.

Supplies across most of Dumfries and Galloway are soft. If that holds for your street in Annan, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Electrical connection by a qualified electrician, tested and certified
  • A check of your hot-water system, water pressure and flow rate
  • For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
  • Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area

Decisions to make first

Exposed or concealed

An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in Scotland

In Scotland there is no Part P, but a new shower circuit must still be designed, installed and certified to BS 7671. Water fittings, including pumps and backflow protection, are covered by the Scottish Water Byelaws 2014.

More about shower installation

Shower installation in Annan: questions

How much should I budget for a new shower in Annan?

A new shower in Annan usually costs £450–£3,400 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the water hard in Annan?

Supplies across most of Dumfries and Galloway are soft. If that holds for your street in Annan, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Will a new shower in Annan need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Annan.

Can I fit a shower pump with a combi boiler?

No. A combi boiler takes its water from the mains, and connecting a pump directly to the mains supply is not allowed under the water fittings regulations. Shower pumps are only for gravity systems with a cold tank. If a combi shower is weak, the cause is usually the incoming flow, the boiler output or the head, not something a pump can fix.

Shower installation in Annan

Book a free home survey in Annan. You get a measured layout and an itemised written price before anything is ordered.