- Postcode districts
- N2, N8, N10
- Nearby
- Wood Green, Archway and Finchley
- Guide price
- £550–£4,400
- Typical time on site
- half a day to 3 days
- Water
- Very hard across most of Greater London
- Survey
- Free, at your home
What does a new shower cost in Muswell Hill?
Guide price in Muswell Hill: £550–£4,400 including VAT, depending on the room and what you choose. Labour costs in London put local prices at about 25% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Muswell Hill including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Muswell Hill
We work right across Muswell Hill — N2, N8 and N10 — and in neighbouring Wood Green and Archway.
London homes in Muswell Hill often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. For Muswell Hill homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If you are replacing a failed electric shower in Muswell Hill, we check whether the existing cable and circuit suit the new unit.
Water across much of Greater London is very hard. If your supply in Muswell Hill is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- A check of your hot-water system, water pressure and flow rate
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Electrical connection by a qualified electrician, tested and certified
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
