Shower installation in Thamesmead

Postcode districts: DA18, SE2, SE28
Nearby: Barking, Welling and Becontree
Guide price: £550–£4,400
Typical time on site: half a day to 3 days
Water: Very hard across most of Greater London
Survey: Free, at your home

What does a new shower cost in Thamesmead?

Our guide price for a new shower in Thamesmead is £550–£4,400 including VAT. Labour costs in London put local prices at about 25% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£550–£1,250

Like-for-like mixer or electric shower

Typical

New shower over bath

£1,000–£2,200

Bath screen

New shower with enclosure

£1,900–£4,400

Tiling to the enclosure

Guide prices for Thamesmead including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Thamesmead

In Thamesmead we cover DA18, SE2 and SE28; we also cover Barking, 2.6 miles away, and Welling.

London homes in Thamesmead often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. For Thamesmead homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. We test pressure and flow at Thamesmead surveys before recommending a shower, so you know how it will perform before you buy.

Supplies across most of Greater London are very hard. If your supply in Thamesmead is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
A bath screen, tray or enclosure where the shower is new
Removal of the old shower, a full-flow test and a handover on isolating and descaling it
Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area

Decisions to make first

Head and handset

A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Thamesmead: questions

How much should I budget for a new shower in Thamesmead?

A new shower in Thamesmead usually costs £550–£4,400 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Do you cover DA18 in Thamesmead?

Yes. We cover all of Thamesmead, including DA18, SE2 and SE28, and nearby Barking, Welling and Becontree. Survey visits are free and arranged at a time that suits you.

Is the water hard in Thamesmead?

Who handles building control for a new shower in Thamesmead?

Building control for Thamesmead is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.