Shower installation in Walkden

Postcode districts: M28, M38
Nearby: Farnworth, Swinton and Tyldesley
Guide price: £400–£3,300
Typical time on site: half a day to 3 days
Water: Soft across most of Greater Manchester
Survey: Free, at your home

What does a new shower cost in Walkden?

For Walkden, our guide range for a new shower is £400 to £3,300 including VAT. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£950

Test and handover

Typical

New shower over bath

£750–£1,700

Thermostatic bar shower and riser

New shower with enclosure

£1,400–£3,300

Pipework and waste

Guide prices for Walkden including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Walkden

We cover every part of Walkden, including M28 and M38, and nearby Farnworth (2.3 miles) and Swinton (2.4 miles).

In Walkden, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. We test pressure and flow at Walkden surveys before recommending a shower, so you know how it will perform before you buy. If your Walkden bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.

Most of Greater Manchester is supplied with soft water. If that holds for your street in Walkden, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
A bath screen, tray or enclosure where the shower is new
A check of your hot-water system, water pressure and flow rate

Decisions to make first

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Walkden: questions

How much does a new shower cost in Walkden?

A new shower in Walkden usually costs £400–£3,300 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Who handles building control for a new shower in Walkden?

Building control for Walkden is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Walkden.

Is the home survey in Walkden really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.