- Postcode districts
- LL55
- Nearby
- Bangor, Holyhead and Llandudno
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Gwynedd
- Survey
- Free, at your home
What does a new shower cost in Caernarfon?
Our guide price for a new shower in Caernarfon is £400–£3,300 including VAT. Prices in Wales run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Caernarfon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Caernarfon
In Caernarfon we cover LL55; we also cover Bangor, 8.3 miles away, and Holyhead.
Caernarfon gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you are replacing a failed electric shower in Caernarfon, we check whether the existing cable and circuit suit the new unit. If your Caernarfon bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.
Most of Gwynedd is supplied with soft water. If that holds for your street in Caernarfon, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system, water pressure and flow rate
- Electrical connection by a qualified electrician, tested and certified
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Rules that apply in Wales
In Wales, a new circuit for an electric shower is notifiable under the Welsh Part P, which covers more work than the English version. An unvented cylinder must be fitted by a G3-qualified installer.

