Shower installation in Ware

Postcode districts: SG12
Nearby: Hertford, Hoddesdon and Harlow
Guide price: £500–£3,700
Typical time on site: half a day to 3 days
Water: Very hard across most of Hertfordshire
Survey: Free, at your home

What does a new shower cost in Ware?

Guide price in Ware: £500–£3,700 including VAT, depending on the room and what you choose. Labour costs in East of England put local prices at about 6% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£500–£1,050

Existing supply and position

Typical

New shower over bath

£850–£1,900

Tiling the bath surround

New shower with enclosure

£1,600–£3,700

Tray, enclosure and valve

Guide prices for Ware including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Ware

We cover every part of Ware, including SG12, and nearby Hertford (2.4 miles) and Hoddesdon (3.5 miles).

Ware gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Ware bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If you are replacing a failed electric shower in Ware, we check whether the existing cable and circuit suit the new unit.

Water across much of Hertfordshire is very hard. If your supply in Ware is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Removal of the old shower, a full-flow test and a handover on isolating and descaling it
Electrical connection by a qualified electrician, tested and certified
For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
A check of your hot-water system, water pressure and flow rate

Decisions to make first

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Exposed or concealed

An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Ware: questions

How much should I budget for a new shower in Ware?

A new shower in Ware usually costs £500–£3,700 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Who handles building control for a new shower in Ware?

Building control for Ware is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Ware.

Is the home survey in Ware really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.