Shower installation in Swanscombe

Postcode districts: DA10
Nearby: Grays, Gravesend and Longfield
Guide price: £500–£3,900
Typical time on site: half a day to 3 days
Water: Very hard across most of Kent
Survey: Free, at your home

What does a new shower cost in Swanscombe?

Our guide price for a new shower in Swanscombe is £500–£3,900 including VAT. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£500–£1,100

Existing supply and position

Typical

New shower over bath

£900–£2,000

Tiling the bath surround

New shower with enclosure

£1,700–£3,900

Tray, enclosure and valve

Guide prices for Swanscombe including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Swanscombe

We work right across Swanscombe — DA10 — and in neighbouring Grays and Gravesend.

Swanscombe gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Swanscombe bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. For Swanscombe homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.

Supplies across most of Kent are very hard. If your supply in Swanscombe is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
A check of your hot-water system, water pressure and flow rate
Removal of the old shower, a full-flow test and a handover on isolating and descaling it

Decisions to make first

Head and handset

A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Swanscombe: questions

What is the price of a new shower in Swanscombe?

A new shower in Swanscombe usually costs £500–£3,900 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Do you cover DA10 in Swanscombe?

Yes. We cover all of Swanscombe, including DA10, and nearby Grays, Gravesend and Longfield. Survey visits are free and arranged at a time that suits you.

Is the water hard in Swanscombe?

Who handles building control for a new shower in Swanscombe?

Building control for Swanscombe is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.