- Postcode districts
- S63, S70, S71, S75
- Nearby
- Darton, Hoyland Nether and Wombwell
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Moderately hard across most of South Yorkshire
- Survey
- Free, at your home
What does a new shower cost in Barnsley?
Our guide price for a new shower in Barnsley is £400–£3,300 including VAT. We adjust the national guide for Yorkshire and the Humber, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Barnsley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Barnsley
In Barnsley we cover S63, S70, S71 and 1 more postcode districts; we also cover Darton, 3.1 miles away, and Hoyland Nether.
In Barnsley, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If you are replacing a failed electric shower in Barnsley, we check whether the existing cable and circuit suit the new unit. If the shower in your Barnsley home swings between hot and cold, a thermostatic valve is usually the fix.
Supplies across most of South Yorkshire are moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Barnsley. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Electrical connection by a qualified electrician, tested and certified
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
