- Postcode districts
- ST3, ST4, ST12
- Nearby
- Stoke-on-Trent, Newcastle under Lyme and Kidsgrove
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Moderately hard across most of Staffordshire
- Survey
- Free, at your home
What does a new shower cost in Longton?
For Longton, our guide range for a new shower is £450 to £3,400 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Longton including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Longton
As well as Longton itself (ST3, ST4 and ST12), we survey in Stoke-on-Trent, Newcastle under Lyme and Kidsgrove.
In Longton, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Longton bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If you are replacing a failed electric shower in Longton, we check whether the existing cable and circuit suit the new unit.
Most of Staffordshire has moderately hard water. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Longton. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- A check of your hot-water system, water pressure and flow rate
- Electrical connection by a qualified electrician, tested and certified
Decisions to make first
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

