- Postcode districts
- CV12
- Nearby
- Nuneaton, Coventry and Hinckley
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Warwickshire
- Survey
- Free, at your home
What does a new shower cost in Bedworth?
Our guide price for a new shower in Bedworth is £450–£3,400 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Bedworth including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Bedworth
We work right across Bedworth — CV12 — and in neighbouring Nuneaton and Coventry.
In Bedworth, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If the shower in your Bedworth home swings between hot and cold, a thermostatic valve is usually the fix. If your Bedworth bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.
Supplies across most of Warwickshire are hard. If your supply in Bedworth is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- A check of your hot-water system, water pressure and flow rate
- Electrical connection by a qualified electrician, tested and certified
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Decisions to make first
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
