What does a shower room cost in Shropshire?
Our guide range in Shropshire is £4,400–£8,800 including VAT.
Essential
- Tiling to the shower area
Signature
- Large walk-in tray and frameless screen
Bespoke
- Concealed thermostatic or digital shower
Guide prices for Shropshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Shropshire?
Supplies across most of Shropshire are moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Telford. Hardness varies street by street, so check the figure for your postcode with your water supplier. For shower rooms in Telford, we check the water pressure and hot-water system at the survey, because that decides how well the shower will perform.
What the job includes
- Extractor fan, lighting and towel rail wired by a qualified electrician, tested and certified
- A thermostatic shower valve, exposed or concealed, with a fixed head, a handset or both
- A survey of water pressure and flow, the hot-water system and the floor where the tray or former will sit
- Removal of the old bath and suite, waste removal, testing and handover
- A low-profile tray or a tiled level floor, with the waste positioned for a good fall
- Tanking to the shower area, then wall and floor tiling
Decisions to make first
Valve and heads
A bar valve is simple and easy to service. A concealed valve with a ceiling head looks cleaner but needs good flow to perform.
Tray size
A 1200 by 800 mm or 1400 by 900 mm tray with a single panel makes a comfortable walk-in. Go as long as the room allows; length does more than width to keep spray inside.
Storage
With no bath, there is often space for a full-width vanity unit or a tall cupboard for towels.
Glass
8 mm toughened glass is the usual standard for a walk-in panel. An easy-clean coating helps a great deal in hard-water areas.
Rules that apply in England
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In England, any change to the wiring in the shower room, or a new circuit for an electric shower, is notifiable under Part P. If you are replacing the fan, keep it at least as effective as the old one; Approved Document F gives 15 litres per second intermittent for a bathroom.

