What does a shower room cost in West Yorkshire?
Our guide range in West Yorkshire is £4,200–£8,400 including VAT. Prices in West Yorkshire run at about 7% below the UK guide, based on Yorkshire and the Humber labour rates.
Essential
- Tray, enclosure and mixer shower
Signature
- Fitted vanity and concealed cistern
Bespoke
- Underfloor heating, mirror cabinet
Guide prices for West Yorkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in West Yorkshire?
- Leeds
- Bradford
- Huddersfield
- Wakefield
- Halifax
- Dewsbury
- Morley
- Keighley
- Castleford
- Pontefract
- Batley
- Yeadon
- Brighouse
- Shipley
- Cleckheaton
- Pudsey
- Lofthouse
- Ossett
- Guiseley
- Liversedge
- Horsforth
- South Elmsall
- Mirfield
- Heckmondwike
- Bingley
- Kippax
- Baildon
- Elland
Most of West Yorkshire is supplied with soft water. If that holds for your street in Leeds, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your second bathroom in Leeds is too narrow for a bath, a long walk-in tray can often fit along the same wall.
What the job includes
- An enclosure, walk-in panel or frameless screen in toughened safety glass
- Removal of the old bath and suite, waste removal, testing and handover
- Recessed niches or shelving in the shower wall
- Extractor fan, lighting and towel rail wired by a qualified electrician, tested and certified
- Tanking to the shower area, then wall and floor tiling
- A basin and WC to suit the space, freestanding or set into a fitted furniture run
Decisions to make first
Tray or level floor
A low-profile stone-resin tray is quicker to fit and costs less. A tiled level floor looks seamless but needs a former, tanking and more floor preparation.
Tray size
A 1200 by 800 mm or 1400 by 900 mm tray with a single panel makes a comfortable walk-in. Go as long as the room allows; length does more than width to keep spray inside.
Valve and heads
A bar valve is simple and easy to service. A concealed valve with a ceiling head looks cleaner but needs good flow to perform.
Storage
With no bath, there is often space for a full-width vanity unit or a tall cupboard for towels.
Rules that apply in England
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In England, any change to the wiring in the shower room, or a new circuit for an electric shower, is notifiable under Part P. If you are replacing the fan, keep it at least as effective as the old one; Approved Document F gives 15 litres per second intermittent for a bathroom.

