Bathroom strip-out in Brent

Postcode districts: HA0, HA9, NW2, NW9, NW10
Nearby: Harrow, Bushey and Borehamwood
Guide price: £750–£2,200
Typical time on site: 1–2 working days
Water: Very hard across most of Greater London
Survey: Free, at your home

What does a bathroom strip-out cost in Brent?

Guide price in Brent: £750–£2,200 including VAT, depending on the room and what you choose. We adjust the national guide for London, where prices are typically about 25% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Strip-out only

£750–£1,250

Pipework capped safely

Strip-out and prep

£1,250–£2,200

Ready for fitting

Back to brick

£1,900–£3,800

Plaster and tiles removed

Guide prices for Brent including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Brent

In Brent we cover HA0, HA9, NW2 and 2 more postcode districts; we also cover Harrow, 2.2 miles away, and Bushey.

London homes in Brent often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. If your Brent bathroom is upstairs, the stairs and landing are protected before anything heavy comes down. For Brent homes built before 2000, we ask about textured ceilings and old floor tiles before quoting a strip-out.

Supplies across most of Greater London are very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Waste loaded and taken away by a licensed waste carrier
Wall and floor tiles taken off with as little damage as possible to sound plaster
Isolating the water and capping the supply to each fitting with a proper end, then checking for leaks
Lights, fan, shaver socket and heated rail disconnected and made safe by a qualified electrician where needed

Decisions to make first

The floor

Old vinyl or tiles on a ply overlay can come up with the ply. Tiles bonded to a screed may need grinding back or overlaying instead.

Salvage

If you want to keep a cast-iron bath, a radiator or a piece of furniture, say so before we start, so it comes out whole rather than in pieces.

Rules that apply in England

In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

More about bathroom strip-out

Bathroom strip-out in Brent: questions

What is the price of a bathroom strip-out in Brent?

A bathroom strip-out in Brent usually costs £750–£2,200 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Do you cover HA0 in Brent?

Yes. We cover all of Brent, including HA0, HA9, NW2, NW9 and 1 more postcode districts, and nearby Harrow, Bushey and Borehamwood. Survey visits are free and arranged at a time that suits you.

Is the water hard in Brent?

Who handles building control for a bathroom strip-out in Brent?

Building control for Brent is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can I strip out my own bathroom?

You can, but cap every supply properly, have the electrics made safe by an electrician, and test for asbestos first in a home built before 2000. The waste must go to a licensed waste carrier or a household waste site that accepts it. Some fitters prefer to do the strip-out themselves so they know exactly what they are fitting onto, so ask yours first.