Bathroom strip-out on Merseyside

What does a bathroom strip-out cost on Merseyside?

Our guide range on Merseyside is £550–£1,700 including VAT. Prices on Merseyside run at about 6% below the UK guide, based on North West England labour rates.

Typical

Strip-out only

£550–£950

Pipework capped safely

Strip-out and prep

£950–£1,700

Ready for fitting

Back to brick

£1,400–£2,800

Plaster and tiles removed

Guide prices for Merseyside including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover on Merseyside?

Most of Merseyside is supplied with soft water. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier. We time strip-outs in Liverpool for just before the fit, so you are not left without a bathroom while waiting for products.

What the job includes

Wall and floor tiles taken off with as little damage as possible to sound plaster
Removal of the bath or shower tray, enclosure, basin, WC, furniture and accessories
A note of what was found: floor and wall condition, pipe runs and any damaged timber
Lights, fan, shaver socket and heated rail disconnected and made safe by a qualified electrician where needed
Waste loaded and taken away by a licensed waste carrier
Dust sheets and floor protection on the route out through the house

Decisions to make first

Keep or lose the plaster

Tiles often come off leaving plaster that can be tiled again. If the plaster comes away with them, the wall is boarded or re-plastered.

Salvage

If you want to keep a cast-iron bath, a radiator or a piece of furniture, say so before we start, so it comes out whole rather than in pieces.

The floor

Old vinyl or tiles on a ply overlay can come up with the ply. Tiles bonded to a screed may need grinding back or overlaying instead.

Strip-out only or with prep

Strip-out only leaves walls and floors as found. With prep, walls are boarded or patched and the floor checked and overlaid, ready for fitting.

Rules that apply in England

Homes built before 2000 can contain asbestos in textured ceiling coatings, old floor tiles, cistern lids and boxing panels, so suspect materials should be tested before strip-out if there is any doubt. Bathroom waste should be taken away by a licensed waste carrier. Disconnecting electrical items should leave every circuit safe and is a job for a qualified electrician, and any work near a boiler or gas pipe is for a Gas Safe registered engineer.

In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

Bathroom strip-out on Merseyside: questions

How much does a bathroom strip-out cost on Merseyside?

A bathroom strip-out on Merseyside typically costs £550–£1,700 including VAT, based on North West England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns on Merseyside do you cover?

We cover the whole of Merseyside, including Liverpool, Birkenhead, St Helens, Southport, Wallasey, Bootle, Bebington and Huyton. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a bathroom strip-out take?

Most jobs take 1–2 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard on Merseyside?

Do you take the old bathroom away?

Yes. The old suite, tiles, boards and packaging are taken away by a licensed waste carrier as part of the strip-out. Whoever you use, ask how they dispose of the waste, because a householder can be held responsible if it ends up fly-tipped.