Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Scotland

Bathroom strip-out in Perth and Kinross

Bathroom strip-out in Perth and Kinross, planned from a measured survey and priced in writing before anything is ordered.

£600–£1,750 inc VAT1–2 working days4 towns listed
Old bathroom being stripped out ready for a new fit

What does a bathroom strip-out cost in Perth and Kinross?

Our guide range in Perth and Kinross is £600–£1,750 including VAT. Prices in Perth and Kinross run at about 4% below the UK guide, based on Scotland labour rates.

Strip-out and prep

£950–£1,750
  • Ready for fitting

Back to brick

£1,450–£2,900
  • Plaster and tiles removed

Guide prices for Perth & Kinross including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Perth and Kinross?

Most of Perth and Kinross is supplied with soft water. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Perth bathroom is upstairs, the stairs and landing are protected before anything heavy comes down.

What the job includes

  • Waste loaded and taken away by a licensed waste carrier
  • Lights, fan, shaver socket and heated rail disconnected and made safe by a qualified electrician where needed
  • Dust sheets and floor protection on the route out through the house
  • The soil pipe sealed against smells once the WC is off
  • Wall and floor tiles taken off with as little damage as possible to sound plaster
  • A note of what was found: floor and wall condition, pipe runs and any damaged timber

Decisions to make first

Asbestos testing

In a home built before 2000, a sample test before work starts settles whether a ceiling coating, floor tile or boxing panel needs specialist removal.

Salvage

If you want to keep a cast-iron bath, a radiator or a piece of furniture, say so before we start, so it comes out whole rather than in pieces.

Strip-out only or with prep

Strip-out only leaves walls and floors as found. With prep, walls are boarded or patched and the floor checked and overlaid, ready for fitting.

Keep or lose the plaster

Tiles often come off leaving plaster that can be tiled again. If the plaster comes away with them, the wall is boarded or re-plastered.

Rules that apply in Scotland

Homes built before 2000 can contain asbestos in textured ceiling coatings, old floor tiles, cistern lids and boxing panels, so suspect materials should be tested before strip-out if there is any doubt. Bathroom waste should be taken away by a licensed waste carrier. Disconnecting electrical items should leave every circuit safe and is a job for a qualified electrician, and any work near a boiler or gas pipe is for a Gas Safe registered engineer.

In Scotland, removal work does not need a building warrant, but structural work, altering drainage or forming a new bathroom afterwards may. Where a warrant is needed, it has to be granted before that work starts, so plan the strip-out around it.

Bathroom strip-out in Perth and Kinross: questions

How much does a bathroom strip-out cost in Perth and Kinross?

A bathroom strip-out in Perth and Kinross typically costs £600–£1,750 including VAT, based on Scotland prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Perth and Kinross do you cover?

We cover the whole of Perth & Kinross, including Perth, Blairgowrie and Rattray, Crieff and Auchterarder. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a bathroom strip-out take?

Most jobs take 1–2 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Perth and Kinross?

Most of Perth and Kinross is supplied with soft water. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

How do you get a cast-iron bath out?

A cast-iron bath can weigh well over 100 kg, so it is usually broken up in place with the room protected, unless you want to keep it. Taking one out whole needs several people, a clear route and care on the stairs. Tell us at the survey if you want it saved.

Bathroom strip-out in Perth and Kinross

Book a free home survey anywhere in Perth and Kinross. You get a measured layout and an itemised written price.