- Postcode districts
- AB43
- Nearby
- Peterhead, Inverurie and Aberdeen
- Guide price
- £650–£2,400
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Soft across most of Aberdeen and Aberdeenshire
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Fraserburgh?
For Fraserburgh, our guide range for bathroom underfloor heating is £650 to £2,400 including VAT. Labour costs in Scotland put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Insulation board
Electric, larger room
- Electrician sign-off
Wet system
- Pipes linked to the heating
Guide prices for Fraserburgh including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Fraserburgh
In Fraserburgh we cover AB43; we also cover Peterhead, 15.3 miles away, and Inverurie.
Fraserburgh gets the same process as anywhere else: a free survey at your home and a written, itemised quote. For Fraserburgh homes having the bathroom floor replaced, underfloor heating adds one to two days to the fit. If your Fraserburgh bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer.
Water across much of Aberdeen and Aberdeenshire is soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of the floor construction, the room's heat loss and where the thermostat and supply will go
- For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
- A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
- Bringing the system up to temperature gradually once the adhesive and grout have cured
Decisions to make first
Floor finish
Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.
Mat or loose cable
Mats are quickest on square, open floors. Loose cable is easier to route around awkward shapes, pipe boxing and a curved shower area.
Rules that apply in Scotland
Scotland has no Part P. Underfloor heating added during a straight bathroom refit rarely needs a building warrant on its own, but it must be installed, tested and certified to BS 7671 with RCD protection.

