- Postcode districts
- G84
- Nearby
- Greenock, Vale of Leven and Dumbarton
- Guide price
- £650–£2,400
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Soft across most of Argyll and Bute
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Helensburgh?
As a guide, budget £650 to £2,400 including VAT for bathroom underfloor heating in Helensburgh; your written quote will pin it down. We adjust the national guide for Scotland, where prices are typically about 4% below the UK average. Travel and delivery to islands and remote areas are priced on your quote. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Thermostat and RCD-protected supply
Electric, larger room
- Whole floor coverage
Wet system
- Manifold or single-zone kit
Guide prices for Helensburgh including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Helensburgh
As well as Helensburgh itself (G84), we survey in Greenock, Vale of Leven and Dumbarton.
Being a smaller town does not change how we work in Helensburgh: free survey, written quote, one team. If your Helensburgh home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below. We check door thresholds in Helensburgh homes at the survey, because underfloor heating and new tiles raise the floor slightly.
Supplies across most of Argyll and Bute are soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
- Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
- Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
- A floor sensor set between the heating runs and wired back to the thermostat
Decisions to make first
Floor finish
Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.
Mat or loose cable
Mats are quickest on square, open floors. Loose cable is easier to route around awkward shapes, pipe boxing and a curved shower area.
Rules that apply in Scotland
Scotland has no Part P. Underfloor heating added during a straight bathroom refit rarely needs a building warrant on its own, but it must be installed, tested and certified to BS 7671 with RCD protection.

