Underfloor heating in Peterborough

Postcode districts: PE1, PE2, PE3, PE4
Nearby: Stamford, March and Spalding
Guide price: £750–£2,600
Typical time on site: 1–2 working days (added to a fit)
Water: Very hard across most of Cambridgeshire
Survey: Free, at your home

What does bathroom underfloor heating cost in Peterborough?

Our guide price for bathroom underfloor heating in Peterborough is £750–£2,600 including VAT. Labour costs in East of England put local prices at about 6% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£750–£1,600

Thermostat and RCD-protected supply

Electric, larger room

£1,250–£2,300

Whole floor coverage

Wet system

£1,600–£3,200

Manifold or single-zone kit

Guide prices for Peterborough including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Peterborough

We cover every part of Peterborough, including PE1, PE2, PE3 and 1 more postcode districts, and nearby Stamford (11.2 miles) and March (14.2 miles).

Peterborough is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. Whether your Peterborough bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room. Where a Peterborough home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.

Water across much of Cambridgeshire is very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A floor sensor set between the heating runs and wired back to the thermostat
A check of the floor construction, the room's heat loss and where the thermostat and supply will go
The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed

Decisions to make first

Floor heating and towel rail

Underfloor heating warms the room; a towel rail dries towels. Many bathrooms have both, and a dual-fuel rail keeps working in summer when the boiler is off.

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Peterborough: questions

How much should I budget for bathroom underfloor heating in Peterborough?

Bathroom underfloor heating in Peterborough usually costs £750–£2,600 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Do you cover PE1 in Peterborough?

Yes. We cover all of Peterborough, including PE1, PE2, PE3 and PE4, and nearby Stamford, March and Spalding. Survey visits are free and arranged at a time that suits you.

Is the water hard in Peterborough?

Who handles building control for bathroom underfloor heating in Peterborough?

Building control for Peterborough is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Is electric underfloor heating expensive to run in a bathroom?

Running cost depends on the heated area, the insulation under the mat, how long it runs and your electricity tariff. As an example, a 150 W per m² mat covering 3 m² draws 450 W, so two hours a day uses about 0.9 kWh. A timer and floor sensor stop it running when nobody is using the room.