- Postcode districts
- CA14
- Nearby
- Whitehaven, Carlisle and Penrith
- Guide price
- £650–£2,400
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Soft across most of Cumbria
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Workington?
As a guide, budget £650 to £2,400 including VAT for bathroom underfloor heating in Workington; your written quote will pin it down. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Insulation board
Electric, larger room
- Electrician sign-off
Wet system
- Pipes linked to the heating
Guide prices for Workington including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Workington
In Workington we cover CA14; we also cover Whitehaven, 6.7 miles away, and Carlisle.
Workington gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Workington bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer. Whether your Workington bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room.
Most of Cumbria is supplied with soft water. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
- A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
- A check of the floor construction, the room's heat loss and where the thermostat and supply will go
- The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
Decisions to make first
Electric or wet
Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.
Floor finish
Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.
Rules that apply in England
In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.
