- Postcode districts
- SA15
- Nearby
- Gorseinon, Swansea and Ammanford
- Guide price
- £650–£2,300
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Soft across most of Dyfed
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Llanelli?
Our guide price for bathroom underfloor heating in Llanelli is £650–£2,300 including VAT. Labour costs in Wales put local prices at about 7% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Thermostat and RCD-protected supply
Electric, larger room
- Whole floor coverage
Wet system
- Manifold or single-zone kit
Guide prices for Llanelli including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Llanelli
We work right across Llanelli — SA15 — and in neighbouring Gorseinon and Swansea.
In Llanelli, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Llanelli home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below. If your Llanelli bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer.
Water across much of Dyfed is soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
- A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
- A check of the floor construction, the room's heat loss and where the thermostat and supply will go
- Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
Decisions to make first
Floor finish
Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.
Electric or wet
Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.
Rules that apply in Wales
In Wales, the Welsh Part P also makes a new underfloor heating circuit notifiable, and it covers more bathroom electrical work than the English version. A registered electrician handles the notification.

