- Postcode districts
- BN1, BN3, BN41
- Nearby
- Brighton, Portslade and Shoreham-by-Sea
- Guide price
- £800–£2,800
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Hard across most of East Sussex
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Hove?
As a guide, budget £800 to £2,800 including VAT for bathroom underfloor heating in Hove; your written quote will pin it down. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Mat under the tiles
Electric, larger room
- Programmable smart thermostat
Wet system
- Screed or low-profile boards
Guide prices for Hove including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hove
We cover every part of Hove, including BN1, BN3 and BN41, and nearby Brighton (1.2 miles) and Portslade (2.3 miles).
Across a large town like Hove, homes range from older terraces to newer estates; the survey tells us which pipework and floor we are dealing with. Where a Hove home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric. Whether your Hove bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room.
Water across much of East Sussex is hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
- Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
- Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
- A check of the floor construction, the room's heat loss and where the thermostat and supply will go
Decisions to make first
Floor finish
Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.
Insulation board thickness
Thicker boards warm up faster and lose less heat downwards, but raise the floor; the right choice depends on the door threshold and the next room.
Rules that apply in England
In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

