- Postcode districts
- GL20
- Nearby
- Cheltenham, Gloucester and Great Malvern
- Guide price
- £700–£2,600
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Hard across most of Gloucestershire
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Tewkesbury?
Our guide price for bathroom underfloor heating in Tewkesbury is £700–£2,600 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Insulation board
Electric, larger room
- Electrician sign-off
Wet system
- Pipes linked to the heating
Guide prices for Tewkesbury including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Tewkesbury
As well as Tewkesbury itself (GL20), we survey in Cheltenham, Gloucester and Great Malvern.
Tewkesbury gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Tewkesbury home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below. We check door thresholds in Tewkesbury homes at the survey, because underfloor heating and new tiles raise the floor slightly.
Most of Gloucestershire has hard water. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
- A check of the floor construction, the room's heat loss and where the thermostat and supply will go
- For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
- The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
Decisions to make first
Electric or wet
Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.
Floor finish
Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.
Rules that apply in England
In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

