Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Greater London · SW3

Underfloor heating in Battersea

Underfloor heating in Battersea, planned from measurements taken in your home and priced in writing. We cover SW3, SW8 and SW11 and the surrounding area.

£900–£3,100 inc VAT1–2 working days (added to a fit)Free home survey
Electric underfloor heating mat laid before tiling, example for Battersea
Postcode districts
SW3, SW8, SW11
Nearby
Chelsea, Fulham and Brixton
Guide price
£900–£3,100
Typical time on site
1–2 working days (added to a fit)
Water
Very hard across most of Greater London
Survey
Free, at your home

What does bathroom underfloor heating cost in Battersea?

Guide price in Battersea: £900–£3,100 including VAT, depending on the room and what you choose. Labour costs in London put local prices at about 25% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Electric, larger room

£1,500–£2,800
  • Programmable smart thermostat

Wet system

£1,900–£3,800
  • Screed or low-profile boards

Guide prices for Battersea including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Battersea

In Battersea we cover SW3, SW8 and SW11; we also cover Chelsea, 1.1 miles away, and Fulham.

In Battersea, many bathrooms are in flats or converted houses, so we check lease consents, access and the floor below before we price. For Battersea homes having the bathroom floor replaced, underfloor heating adds one to two days to the fit. We check door thresholds in Battersea homes at the survey, because underfloor heating and new tiles raise the floor slightly.

Supplies across most of Greater London are very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
  • Bringing the system up to temperature gradually once the adhesive and grout have cured
  • A floor sensor set between the heating runs and wired back to the thermostat
  • A check of the floor construction, the room's heat loss and where the thermostat and supply will go

Decisions to make first

Insulation board thickness

Thicker boards warm up faster and lose less heat downwards, but raise the floor; the right choice depends on the door threshold and the next room.

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Battersea: questions

How much should I budget for bathroom underfloor heating in Battersea?

Bathroom underfloor heating in Battersea usually costs £900–£3,100 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

How long does bathroom underfloor heating take?

Allow 1–2 working days (added to a fit) on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Battersea.

Is the home survey in Battersea really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover SW3 in Battersea?

Yes. We cover all of Battersea, including SW3, SW8 and SW11, and nearby Chelsea, Fulham and Brixton. Survey visits are free and arranged at a time that suits you.

Is underfloor heating enough to heat a bathroom on its own?

In a well-insulated bathroom with most of the floor open, it often is. In a small room, the bath, WC and furniture cover much of the floor, so the heated area may be too small to be the only heat source. A heated towel rail alongside is the usual answer.

Underfloor heating in Battersea

Book a free home survey in Battersea. You get a measured layout and an itemised written price before anything is ordered.