Underfloor heating in Brent

Postcode districts: HA0, HA9, NW2, NW9, NW10
Nearby: Harrow, Bushey and Borehamwood
Guide price: £900–£3,100
Typical time on site: 1–2 working days (added to a fit)
Water: Very hard across most of Greater London
Survey: Free, at your home

What does bathroom underfloor heating cost in Brent?

As a guide, budget £900 to £3,100 including VAT for bathroom underfloor heating in Brent; your written quote will pin it down. Prices in London run at about 25% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£900–£1,900

Thermostat and RCD-protected supply

Electric, larger room

£1,500–£2,800

Whole floor coverage

Wet system

£1,900–£3,800

Manifold or single-zone kit

Guide prices for Brent including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Brent

In Brent we cover HA0, HA9, NW2 and 2 more postcode districts; we also cover Harrow, 2.2 miles away, and Bushey.

London homes in Brent often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. Where a Brent home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric. We check door thresholds in Brent homes at the survey, because underfloor heating and new tiles raise the floor slightly.

Supplies across most of Greater London are very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
A check of the floor construction, the room's heat loss and where the thermostat and supply will go
Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
A floor sensor set between the heating runs and wired back to the thermostat

Decisions to make first

Floor finish

Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Brent: questions

How much does bathroom underfloor heating cost in Brent?

Bathroom underfloor heating in Brent usually costs £900–£3,100 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Do you cover HA0 in Brent?

Yes. We cover all of Brent, including HA0, HA9, NW2, NW9 and 1 more postcode districts, and nearby Harrow, Bushey and Borehamwood. Survey visits are free and arranged at a time that suits you.

Is the water hard in Brent?

Who handles building control for bathroom underfloor heating in Brent?

Building control for Brent is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Is electric underfloor heating expensive to run in a bathroom?

Running cost depends on the heated area, the insulation under the mat, how long it runs and your electricity tariff. As an example, a 150 W per m² mat covering 3 m² draws 450 W, so two hours a day uses about 0.9 kWh. A timer and floor sensor stop it running when nobody is using the room.