- Postcode districts
- TW4, TW5, UB2
- Nearby
- Hounslow, Isleworth and Southall
- Guide price
- £900–£3,100
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Very hard across most of Greater London
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Heston?
Guide price in Heston: £900–£3,100 including VAT, depending on the room and what you choose. Prices in London run at about 25% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Thermostat and RCD-protected supply
Electric, larger room
- Whole floor coverage
Wet system
- Manifold or single-zone kit
Guide prices for Heston including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Heston
We cover every part of Heston, including TW4, TW5 and UB2, and nearby Hounslow (1.2 miles) and Isleworth (1.5 miles).
In Heston, many bathrooms are in flats or converted houses, so we check lease consents, access and the floor below before we price. If your Heston home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below. If your Heston bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer.
Supplies across most of Greater London are very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
- For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
- A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
- Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
Decisions to make first
Floor finish
Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.
Mat or loose cable
Mats are quickest on square, open floors. Loose cable is easier to route around awkward shapes, pipe boxing and a curved shower area.
Rules that apply in England
In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.
