Underfloor heating in Bolton

Postcode districts: BL1, BL2, BL3, BL4, BL7
Nearby: Farnworth, Westhoughton and Radcliffe
Guide price: £650–£2,400
Typical time on site: 1–2 working days (added to a fit)
Water: Soft across most of Greater Manchester
Survey: Free, at your home

What does bathroom underfloor heating cost in Bolton?

For Bolton, our guide range for bathroom underfloor heating is £650 to £2,400 including VAT. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£650–£1,400

Thermostat and RCD-protected supply

Electric, larger room

£1,150–£2,100

Whole floor coverage

Wet system

£1,400–£2,800

Manifold or single-zone kit

Guide prices for Bolton including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Bolton

We cover every part of Bolton, including BL1, BL2, BL3 and 2 more postcode districts, and nearby Farnworth (2.7 miles) and Westhoughton (4.4 miles).

Across a large town like Bolton, homes range from older terraces to newer estates; the survey tells us which pipework and floor we are dealing with. Where a Bolton home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric. We check door thresholds in Bolton homes at the survey, because underfloor heating and new tiles raise the floor slightly.

Water across much of Greater Manchester is soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A check of the floor construction, the room's heat loss and where the thermostat and supply will go
Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
A floor sensor set between the heating runs and wired back to the thermostat

Decisions to make first

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Floor heating and towel rail

Underfloor heating warms the room; a towel rail dries towels. Many bathrooms have both, and a dual-fuel rail keeps working in summer when the boiler is off.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Bolton: questions

How much does bathroom underfloor heating cost in Bolton?

Bathroom underfloor heating in Bolton usually costs £650–£2,400 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the home survey in Bolton really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover BL1 in Bolton?

Yes. We cover all of Bolton, including BL1, BL2, BL3, BL4 and 1 more postcode districts, and nearby Farnworth, Westhoughton and Radcliffe. Survey visits are free and arranged at a time that suits you.

Is the water hard in Bolton?

Is underfloor heating enough to heat a bathroom on its own?

In a well-insulated bathroom with most of the floor open, it often is. In a small room, the bath, WC and furniture cover much of the floor, so the heated area may be too small to be the only heat source. A heated towel rail alongside is the usual answer.