- Postcode districts
- L19, L24, L26
- Nearby
- Allerton, Halewood and Speke
- Guide price
- £650–£2,400
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Soft across most of Merseyside
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Hunts Cross?
In Hunts Cross, bathroom underfloor heating typically costs £650–£2,400 including VAT, based on North West England prices. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Insulation board
Electric, larger room
- Electrician sign-off
Wet system
- Pipes linked to the heating
Guide prices for Hunts Cross including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hunts Cross
As well as Hunts Cross itself (L19, L24 and L26), we survey in Allerton, Halewood and Speke.
Hunts Cross gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Hunts Cross home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below. Whether your Hunts Cross bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room.
Water across much of Merseyside is soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
- Bringing the system up to temperature gradually once the adhesive and grout have cured
- Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
- A floor sensor set between the heating runs and wired back to the thermostat
Decisions to make first
Mat or loose cable
Mats are quickest on square, open floors. Loose cable is easier to route around awkward shapes, pipe boxing and a curved shower area.
Electric or wet
Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.
Rules that apply in England
In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

