Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Oxfordshire · OX6

Underfloor heating in Bicester

Underfloor heating in Bicester, planned from measurements taken in your home and priced in writing. We cover OX6 and OX26 and the surrounding area.

£800–£2,800 inc VAT1–2 working days (added to a fit)Free home survey
Electric underfloor heating mat laid before tiling, example for Bicester
Postcode districts
OX6, OX26
Nearby
Oxford, Cowley and Banbury
Guide price
£800–£2,800
Typical time on site
1–2 working days (added to a fit)
Water
Hard across most of Oxfordshire
Survey
Free, at your home

What does bathroom underfloor heating cost in Bicester?

In Bicester, bathroom underfloor heating typically costs £800–£2,800 including VAT, based on South East England prices. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Electric, larger room

£1,350–£2,500
  • Programmable smart thermostat

Wet system

£1,700–£3,400
  • Screed or low-profile boards

Guide prices for Bicester including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Bicester

As well as Bicester itself (OX6 and OX26), we survey in Oxford, Cowley and Banbury.

In Bicester, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. We check door thresholds in Bicester homes at the survey, because underfloor heating and new tiles raise the floor slightly. If your Bicester bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer.

Supplies across most of Oxfordshire are hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
  • Bringing the system up to temperature gradually once the adhesive and grout have cured
  • A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
  • A check of the floor construction, the room's heat loss and where the thermostat and supply will go

Decisions to make first

Insulation board thickness

Thicker boards warm up faster and lose less heat downwards, but raise the floor; the right choice depends on the door threshold and the next room.

Floor heating and towel rail

Underfloor heating warms the room; a towel rail dries towels. Many bathrooms have both, and a dual-fuel rail keeps working in summer when the boiler is off.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Bicester: questions

How much should I budget for bathroom underfloor heating in Bicester?

Bathroom underfloor heating in Bicester usually costs £800–£2,800 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the home survey in Bicester really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover OX6 and OX26 in Bicester?

Yes. We cover all of Bicester, including OX6 and OX26, and nearby Oxford, Cowley and Banbury. Survey visits are free and arranged at a time that suits you.

Is the water hard in Bicester?

Supplies across most of Oxfordshire are hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Is underfloor heating enough to heat a bathroom on its own?

In a well-insulated bathroom with most of the floor open, it often is. In a small room, the bath, WC and furniture cover much of the floor, so the heated area may be too small to be the only heat source. A heated towel rail alongside is the usual answer.

Underfloor heating in Bicester

Book a free home survey in Bicester. You get a measured layout and an itemised written price before anything is ordered.