Underfloor heating in Kelso

Postcode districts: TD5
Nearby: Galashiels, Hawick and Peebles
Guide price: £650–£2,400
Typical time on site: 1–2 working days (added to a fit)
Water: Soft across most of the Scottish Borders
Survey: Free, at your home

What does bathroom underfloor heating cost in Kelso?

Our guide price for bathroom underfloor heating in Kelso is £650–£2,400 including VAT. Labour costs in Scotland put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£650–£1,450

Insulation board

Electric, larger room

£1,150–£2,100

Electrician sign-off

Wet system

£1,450–£2,900

Pipes linked to the heating

Guide prices for Kelso including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Kelso

We work right across Kelso — TD5 — and in neighbouring Galashiels and Hawick.

Being a smaller town does not change how we work in Kelso: free survey, written quote, one team. If your Kelso bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer. Where a Kelso home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.

Supplies across most of the Scottish Borders are soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Bringing the system up to temperature gradually once the adhesive and grout have cured
A check of the floor construction, the room's heat loss and where the thermostat and supply will go
Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer

Decisions to make first

Insulation board thickness

Thicker boards warm up faster and lose less heat downwards, but raise the floor; the right choice depends on the door threshold and the next room.

Floor finish

Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.

Rules that apply in Scotland

Scotland has no Part P. Underfloor heating added during a straight bathroom refit rarely needs a building warrant on its own, but it must be installed, tested and certified to BS 7671 with RCD protection.

More about underfloor heating

Underfloor heating in Kelso: questions

What is the price of bathroom underfloor heating in Kelso?

Bathroom underfloor heating in Kelso usually costs £650–£2,400 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the home survey in Kelso really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover TD5 in Kelso?

Yes. We cover all of Kelso, including TD5, and nearby Galashiels, Hawick and Peebles. Survey visits are free and arranged at a time that suits you.

Is the water hard in Kelso?

Is underfloor heating enough to heat a bathroom on its own?

In a well-insulated bathroom with most of the floor open, it often is. In a small room, the bath, WC and furniture cover much of the floor, so the heated area may be too small to be the only heat source. A heated towel rail alongside is the usual answer.