What does a new vanity unit cost in Buckinghamshire?
Our guide range in Buckinghamshire is £400–£1,700 including VAT. Prices in Buckinghamshire run at about 12% above the UK guide, based on South East England labour rates.
Fit your unit
- Sealed and tested
Supply and fit
- Floor-standing or wall-hung unit
Double or bespoke
- Stone or solid-surface top
Guide prices for Buckinghamshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Buckinghamshire?
- Milton Keynes
- High Wycombe
- Aylesbury
- Bletchley
- Amersham
- Chesham
- Gerrards Cross
- Chalfont St Peter
- Marlow
- Amersham on the Hill
- Newport Pagnell
Water across much of Buckinghamshire is hard. Taps, plug wastes and toilet pans scale up quickly, so chrome copes better than matt black, and a removable aerator is worth having. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Milton Keynes water is hard, a tap with a removable aerator and a smooth one-piece basin top are easier to keep clean.
What the job includes
- Fitting the unit level, with the basin sealed to the top and the top sealed to the wall
- Patching or re-tiling the wall where the old basin left gaps
- Testing for leaks and checking the trap holds its seal
- A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
- Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
- A new tap, trap and the correct slotted or unslotted waste for the basin
Decisions to make first
Wall-hung or floor-standing
Wall-hung units leave the floor clear and are easy to clean under, but need a strong wall. Floor-standing units hold more and suit weak or uneven walls.
Waste and overflow
A basin with an overflow takes a slotted waste; one without needs an unslotted waste, often a push-button 'click-clack' type.
Basin type
An inset or semi-recessed basin, a one-piece moulded top, or a countertop basin on a worktop. Countertop basins need a tall tap or a wall-mounted one.
Width
Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.
Rules that apply in England
Replacing a basin with a vanity unit does not need planning permission or building regulations approval. The new tap must meet the water fittings rules, including protection against backflow, and the waste should connect to the existing drainage through a proper trap. If the unit has a light, or a lit mirror goes above it, the electrical work must suit the zone it sits in under BS 7671 and be RCD protected.
In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.