Vanity units in Atherton

Postcode districts: BL5, M29, M46
Nearby: Tyldesley, Westhoughton and Leigh
Guide price: £350–£1,400
Typical time on site: half a day to 1 day
Water: Soft across most of Greater Manchester
Survey: Free, at your home

What does a new vanity unit cost in Atherton?

Our guide price for a new vanity unit in Atherton is £350–£1,400 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Fit your unit

£140–£350

Sealed and tested

Typical

Supply and fit

£400–£950

Floor-standing or wall-hung unit

Double or bespoke

£950–£2,400

Stone or solid-surface top

Guide prices for Atherton including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Atherton

As well as Atherton itself (BL5, M29 and M46), we survey in Tyldesley, Westhoughton and Leigh.

Atherton gets the same process as anywhere else: a free survey at your home and a written, itemised quote. We quote vanity unit work in Atherton after seeing the wall and pipework, so any re-tiling is on the quote from the start. If your Atherton cloakroom still has a pedestal basin, a compact vanity unit adds storage without taking more floor.

Most of Greater Manchester is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Fitting the unit level, with the basin sealed to the top and the top sealed to the wall
Removal of the old basin and pedestal, or old vanity, and taking it away
Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
A new tap, trap and the correct slotted or unslotted waste for the basin

Decisions to make first

Basin type

An inset or semi-recessed basin, a one-piece moulded top, or a countertop basin on a worktop. Countertop basins need a tall tap or a wall-mounted one.

Drawers or doors

Drawers keep things visible and reachable but lose some space to the trap. Doors give a deeper cupboard and cost less.

Rules that apply in England

In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.

More about vanity units

Vanity units in Atherton: questions

How much should I budget for a new vanity unit in Atherton?

A new vanity unit in Atherton usually costs £350–£1,400 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover BL5 in Atherton?

Yes. We cover all of Atherton, including BL5, M29 and M46, and nearby Tyldesley, Westhoughton and Leigh. Survey visits are free and arranged at a time that suits you.

Is the water hard in Atherton?

Who handles building control for a new vanity unit in Atherton?

Building control for Atherton is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

What size vanity unit do I need?

Measure the wall and leave room to stand at the basin and open the door. Cloakroom units can be around 400 mm wide; most family bathrooms take 600 to 800 mm for a single basin and 1200 mm or more for a double. For a whole wall of storage, look at fitted bathroom furniture.