Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Gwent · NP10

Vanity units in Newport, Gwent

Need a new vanity unit in Newport? We plan it around your room and your budget, then do the whole job with one team and one contract.

£350–£1,400 inc VAThalf a day to 1 dayFree home survey
Wall-hung vanity unit with a basin, tap and mirror, example for Newport
Postcode districts
NP10, NP19, NP20
Nearby
Risca, Cwmbran and Pontypool
Guide price
£350–£1,400
Typical time on site
half a day to 1 day
Water
Varies across Gwent
Survey
Free, at your home

What does a new vanity unit cost in Newport?

Our guide price for a new vanity unit in Newport is £350–£1,400 including VAT. Prices in Wales run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Fit your unit

£140–£350
  • Sealed and tested

Double or bespoke

£950–£2,300
  • Stone or solid-surface top

Guide prices for Newport including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Newport

We cover every part of Newport, including NP10, NP19 and NP20, and nearby Risca (4.6 miles) and Cwmbran (4.7 miles).

Newport is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. If your Newport cloakroom still has a pedestal basin, a compact vanity unit adds storage without taking more floor. If your Newport water is hard, a tap with a removable aerator and a smooth one-piece basin top are easier to keep clean.

Supplies across Gwent range from soft to hard depending on the source. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Moving the waste and supply positions where the new unit needs them higher, lower or to one side
  • A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
  • A new tap, trap and the correct slotted or unslotted waste for the basin
  • Patching or re-tiling the wall where the old basin left gaps

Decisions to make first

Waste and overflow

A basin with an overflow takes a slotted waste; one without needs an unslotted waste, often a push-button 'click-clack' type.

Width

Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.

Rules that apply in Wales

Wales follows the same water fittings regulations as England. Its own Part P covers more electrical work, so a lit vanity or mirror should be connected by a registered electrician.

More about vanity units

Vanity units in Newport: questions

How much should I budget for a new vanity unit in Newport?

A new vanity unit in Newport usually costs £350–£1,400 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover NP10 in Newport?

Yes. We cover all of Newport, including NP10, NP19 and NP20, and nearby Risca, Cwmbran and Pontypool. Survey visits are free and arranged at a time that suits you.

Is the water hard in Newport?

Supplies across Gwent range from soft to hard depending on the source. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a new vanity unit in Newport?

Building control for Newport is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can a wall-hung vanity unit go on a stud wall?

Yes, if there are timber noggins or a fixing frame behind the board at the right height. In a new stud wall these go in before boarding; in an existing one, the board is opened, noggins are added and the wall is made good. Plasterboard fixings alone are not enough for a loaded basin unit.

Vanity units in Newport

Book a free home survey in Newport. You get a measured layout and an itemised written price before anything is ordered.