What does a new vanity unit cost in Lincolnshire?
Our guide range in Lincolnshire is £350–£1,450 including VAT. Prices in Lincolnshire run at about 4% below the UK guide, based on East Midlands labour rates.
Fit your unit
- Fitting a unit you have bought
Supply and fit
- Basin, tap and waste
Double or bespoke
- Re-tiling behind
Guide prices for Lincolnshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Lincolnshire?
Most of Lincolnshire has hard water. Taps, plug wastes and toilet pans scale up quickly, so chrome copes better than matt black, and a removable aerator is worth having. Hardness varies street by street, so check the figure for your postcode with your water supplier. Landlords in Lincoln can have a worn basin replaced with a vanity unit in half a day to a day.
What the job includes
- Patching or re-tiling the wall where the old basin left gaps
- A new tap, trap and the correct slotted or unslotted waste for the basin
- Removal of the old basin and pedestal, or old vanity, and taking it away
- A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
- Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
- Moving the waste and supply positions where the new unit needs them higher, lower or to one side
Decisions to make first
Waste and overflow
A basin with an overflow takes a slotted waste; one without needs an unslotted waste, often a push-button 'click-clack' type.
One basin or two
Two basins help a busy household if the wall is long enough. In a smaller room, one basin with a longer top often works better.
Basin type
An inset or semi-recessed basin, a one-piece moulded top, or a countertop basin on a worktop. Countertop basins need a tall tap or a wall-mounted one.
Wall-hung or floor-standing
Wall-hung units leave the floor clear and are easy to clean under, but need a strong wall. Floor-standing units hold more and suit weak or uneven walls.
Rules that apply in England
Replacing a basin with a vanity unit does not need planning permission or building regulations approval. The new tap must meet the water fittings rules, including protection against backflow, and the waste should connect to the existing drainage through a proper trap. If the unit has a light, or a lit mirror goes above it, the electrical work must suit the zone it sits in under BS 7671 and be RCD protected.
In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.