Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Tyne and Wear · NE1

Vanity units in Gateshead

If you are planning a new vanity unit in Gateshead, the first step is a free survey visit: we measure, check your pipework and electrics, and give you a written quote.

£300–£1,350 inc VAThalf a day to 1 dayFree home survey
Wall-hung vanity unit with a basin, tap and mirror, example for Gateshead
Postcode districts
NE1, NE8, NE9, NE10
Nearby
Newcastle upon Tyne, Felling and Gosforth
Guide price
£300–£1,350
Typical time on site
half a day to 1 day
Water
Soft across most of Tyne and Wear
Survey
Free, at your home

What does a new vanity unit cost in Gateshead?

For Gateshead, our guide range for a new vanity unit is £300 to £1,350 including VAT. Prices in North East England run at about 10% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Fit your unit

£135–£300
  • Taps and waste connected

Double or bespoke

£900–£2,200
  • Double basin or long run

Guide prices for Gateshead including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Gateshead

We work right across Gateshead — NE1, NE8, NE9 and 1 more postcode districts — and in neighbouring Newcastle upon Tyne and Felling.

Across a large town like Gateshead, homes range from older terraces to newer estates; the survey tells us which pipework and floor we are dealing with. If your Gateshead cloakroom still has a pedestal basin, a compact vanity unit adds storage without taking more floor. Landlords in Gateshead can have a worn basin replaced with a vanity unit in half a day to a day.

Supplies across most of Tyne and Wear are soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Moving the waste and supply positions where the new unit needs them higher, lower or to one side
  • Testing for leaks and checking the trap holds its seal
  • Fitting the unit level, with the basin sealed to the top and the top sealed to the wall
  • Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system

Decisions to make first

Width

Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.

Drawers or doors

Drawers keep things visible and reachable but lose some space to the trap. Doors give a deeper cupboard and cost less.

Rules that apply in England

In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.

More about vanity units

Vanity units in Gateshead: questions

How much does a new vanity unit cost in Gateshead?

A new vanity unit in Gateshead usually costs £300–£1,350 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Is the home survey in Gateshead really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover NE1 in Gateshead?

Yes. We cover all of Gateshead, including NE1, NE8, NE9 and NE10, and nearby Newcastle upon Tyne, Felling and Gosforth. Survey visits are free and arranged at a time that suits you.

Is the water hard in Gateshead?

Supplies across most of Tyne and Wear are soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Can I replace a pedestal basin with a vanity unit?

Yes. The existing supply and waste positions usually work with a vanity unit, sometimes with the waste lowered or moved slightly to clear a drawer. The tiles often need patching where the pedestal and basin sat.

Vanity units in Gateshead

Book a free home survey in Gateshead. You get a measured layout and an itemised written price before anything is ordered.