Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Tyne and Wear · NE28

Vanity units in Jarrow

We cover vanity units in Jarrow and the rest of Tyne and Wear. Every job starts with a measured survey at your home and a written price before anything is ordered.

£300–£1,350 inc VAThalf a day to 1 dayFree home survey
Wall-hung vanity unit with a basin, tap and mirror, example for Jarrow
Postcode districts
NE28, NE31, NE32
Nearby
Hebburn, Wallsend and South Shields
Guide price
£300–£1,350
Typical time on site
half a day to 1 day
Water
Soft across most of Tyne and Wear
Survey
Free, at your home

What does a new vanity unit cost in Jarrow?

Guide price in Jarrow: £300–£1,350 including VAT, depending on the room and what you choose. Labour costs in North East England put local prices at about 10% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Fit your unit

£135–£300
  • Taps and waste connected

Double or bespoke

£900–£2,200
  • Double basin or long run

Guide prices for Jarrow including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Jarrow

We cover every part of Jarrow, including NE28, NE31 and NE32, and nearby Hebburn (1.3 miles) and Wallsend (2.1 miles).

Homes in and around Jarrow vary, so we look at the floor, the walls and the water system before we price anything. If your Jarrow water is hard, a tap with a removable aerator and a smooth one-piece basin top are easier to keep clean. If you have bought a vanity unit for your Jarrow bathroom, fit-only installation covers connecting the tap and waste and testing for leaks.

Most of Tyne and Wear is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
  • A new tap, trap and the correct slotted or unslotted waste for the basin
  • A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
  • Testing for leaks and checking the trap holds its seal

Decisions to make first

Drawers or doors

Drawers keep things visible and reachable but lose some space to the trap. Doors give a deeper cupboard and cost less.

One basin or two

Two basins help a busy household if the wall is long enough. In a smaller room, one basin with a longer top often works better.

Rules that apply in England

In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.

More about vanity units

Vanity units in Jarrow: questions

How much does a new vanity unit cost in Jarrow?

A new vanity unit in Jarrow usually costs £300–£1,350 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the water hard in Jarrow?

Most of Tyne and Wear is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a new vanity unit in Jarrow?

Building control for Jarrow is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new vanity unit take?

Allow half a day to 1 day on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Jarrow.

Can a wall-hung vanity unit go on a stud wall?

Yes, if there are timber noggins or a fixing frame behind the board at the right height. In a new stud wall these go in before boarding; in an existing one, the board is opened, noggins are added and the wall is made good. Plasterboard fixings alone are not enough for a loaded basin unit.

Vanity units in Jarrow

Book a free home survey in Jarrow. You get a measured layout and an itemised written price before anything is ordered.