Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Worcestershire · DY13

Vanity units in Stourport-on-Severn

If you are planning a new vanity unit in Stourport-on-Severn, the first step is a free survey visit: we measure, check your pipework and electrics, and give you a written quote.

£350–£1,450 inc VAThalf a day to 1 dayFree home survey
Wall-hung vanity unit with a basin, tap and mirror, example for Stourport-on-Severn
Postcode districts
DY13
Nearby
Kidderminster, Droitwich and Bromsgrove
Guide price
£350–£1,450
Typical time on site
half a day to 1 day
Water
Moderately hard across most of Worcestershire
Survey
Free, at your home

What does a new vanity unit cost in Stourport-on-Severn?

For Stourport-on-Severn, our guide range for a new vanity unit is £350 to £1,450 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.

Fit your unit

£145–£350
  • Sealed and tested

Double or bespoke

£1,000–£2,400
  • Stone or solid-surface top

Guide prices for Stourport-on-Severn including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Stourport-on-Severn

We work right across Stourport-on-Severn — DY13 — and in neighbouring Kidderminster and Droitwich.

Stourport-on-Severn gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Stourport-on-Severn cloakroom still has a pedestal basin, a compact vanity unit adds storage without taking more floor. Landlords in Stourport-on-Severn can have a worn basin replaced with a vanity unit in half a day to a day.

Water across much of Worcestershire is moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
  • A new tap, trap and the correct slotted or unslotted waste for the basin
  • Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
  • Fitting the unit level, with the basin sealed to the top and the top sealed to the wall

Decisions to make first

Width

Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.

Basin type

An inset or semi-recessed basin, a one-piece moulded top, or a countertop basin on a worktop. Countertop basins need a tall tap or a wall-mounted one.

Rules that apply in England

In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.

More about vanity units

Vanity units in Stourport-on-Severn: questions

What is the price of a new vanity unit in Stourport-on-Severn?

A new vanity unit in Stourport-on-Severn usually costs £350–£1,450 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the water hard in Stourport-on-Severn?

Water across much of Worcestershire is moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a new vanity unit in Stourport-on-Severn?

Building control for Stourport-on-Severn is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new vanity unit take?

Allow half a day to 1 day on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Stourport-on-Severn.

What height should a vanity unit be?

Most basins are set with the rim around 800 to 900 mm above the floor. A wall-hung unit lets you choose the height, which helps taller households; a floor-standing unit is fixed by its cabinet height.

Vanity units in Stourport-on-Severn

Book a free home survey in Stourport-on-Severn. You get a measured layout and an itemised written price before anything is ordered.